News

Home / News / What is tulle fabric

What is tulle fabric

               
Update:2022-01-07 9:44:09 Friday
Summary:Choose the pattern you are going to sheer polyester fabric sew very carefully. Sheer fabrics need a minimum amount of pattern and garment details. Less is more when it comes to making the most of sheer fabrics.When sewing sheer fabrics, keep in mind ......
Choose the pattern you are going to sheer polyester fabric sew very carefully. Sheer fabrics need a minimum amount of pattern and garment details. Less is more when it comes to making the most of sheer fabrics.When sewing sheer fabrics, keep in mind that they are difficult to cut out so it is a good idea to cut each piece separately as the fabric slips and slides.Do not use carbon to mark the fabric. Instead, use chalk or tailor's tacks.Use weights to stabilize the fabric when cutting. Don't use pins that might slip out.

If you must use pins, insert them into the seam line so as to avoid damaging the fabric prior to sewing.A cardboard cutting board helps with securing the fabric and pins can be pushed into the board.A rotary craft knife is a good option for cutting out pieces. Alternatively, use very sharp scissors and cut with careIt is always a good idea to sew on a scrap to test the tension of your machine, the size of your stitches and the needle you are using. Sheer fabrics tend to pucker as they are sewn so a little test drive is really important.

A loose tension with a shorter stitch is recommended.The use of tissue between the seams or a stitch starter (a piece of fabric to start the seam on) is a good idea. The stitch starter is removed after the seam is completed by gently unpicking it from the beginning of the seam or trimming it off when you neaten the seam. This prevents the machine from chewing up the first few centimeters of your precious sheer fabrics.

Alternatively, hold the fabric tight in front and behind the seam as you sew the sheer fabric. Once again practice this technique so that you know exactly the kind of pressure needed for your fabric. Practice makes perfect!A run and fell seam works better in these areas.Sew seams with utmost care because unpicking damages the fabric and leaves ugly holes in the garment.If you are battling to sew the fabric on your sample then a fabric stabilizer could be the answer.